Today's work on the RV-12 centers around the finishing of the wings. i started with installing the ailerons, then moved on to installing the landing light lense and wing walks nonslip covers.
Builder's note: The yellow tape helps hold the lens in place while installing the hardware.
![](https://lh3.googleusercontent.com/-MRAiEbRuqvo/Va23k1_TfsI/AAAAAAAAEjs/0oYrfIO8Uaw/s500-Ic42/final%252520241.jpg)
Reference: page 33-04
Note: I remove just a small strip of the backing to position the wing walk then worked my way up while removing the backing. Working the air out from around the rivets as I applied it.
![](https://lh3.googleusercontent.com/-9ktVXZH35xU/Va23lbF2kFI/AAAAAAAAEjw/nzBjDLMOpd0/s500-Ic42/final%252520242.jpg)
![](https://lh3.googleusercontent.com/-eyAcHD3X3Ak/Va23l0uB7SI/AAAAAAAAEj4/w2Y0TI68i04/s500-Ic42/final%252520243.jpg)
![](https://lh3.googleusercontent.com/-iCTAh6CzBwE/Va23m_4b61I/AAAAAAAAEkA/cYs0PVQNSFE/s500-Ic42/final%252520244.jpg)
![](https://lh3.googleusercontent.com/-sPU-3FiWzDw/Va23nozfkzI/AAAAAAAAEn8/a3CgDOKBELA/s500-Ic42/final%252520245.jpg)
This completes Section 30 and page 33-04.