Today's project on the RV-12 airplane was finishing the towbar assembly. Since the towbar also serves as the rudder control lock the rudder and linkages needed to be finish first.
Builder's note: I used the scrap handle rubber to cover the "feet" of the towbar.
![](https://lh3.googleusercontent.com/-Y7N6yGVO_FQ/Va23ha7Z1gI/AAAAAAAAEiw/pRkvXQsRa9g/s500-Ic42/final%252520234.jpg)
This completes Section 52 and this entry on my RV-12 aircraft.